FOR ST-LINK V2 For M8 M32 Downloader (Color Random Sending)Item NO.: ST-LINK V2

FOR ST-LINK V2 For M8 M32 Downloader

(Random shipment of colors red, black, gold, green, gray, white, blue, and pink)

Mini XX-LINK V2, fully functional and official, supports automatic upgrades, downloads and debugging of the entire series of STM32 SWD and STM8 SWIM.

Eight highlights of our XXLINK V2:

1. Install the internal motherboard using an aluminum alloy U-disk shell, easy to carry, safe and reliable!

2. The interface definition is directly labeled on the shell, making it clear and practical!

3. Both 5V and 3.3V are provided externally, making it convenient for you to connect the 5V and 3.3V target boards

4. The shell characters are laser engraved!

5. The internal motherboard comes with a 500MA self recovery fuse to protect your expensive computer motherboard!

6. Red and blue dual color LED indicator light, convenient for you to constantly observe the working status of ST-LINK V2!

7. Delivery of 4 DuPont lines allows you to easily handle different target board line orders!

8. The outer packaging uses anti-static bags, and the automatic sealing machine seals the packaging, ensuring safety and reliability. It is not afraid of static electricity or water ingress!

Features and features:

1. Support full series STM32 SWD interface debugging, with simple 4-wire interface (including power supply), fast speed, and stable operation; The interface definition shell is directly marked! No need to flip through the manual!

2. Support full series STM8 SWIM download and debugging (supported by commonly used development environments such as IAR, STVD, etc.); The supported software versions are as follows:

① XTW LINK ST Utility 2.0 and above

② STVD 4.2.1 and above

③ STVP 3.2.3 and above

④ IAR EWARM V6.20 and above

⑤ IAR EWSTM8 V1.30 and above

⑥ KEIL RVMDK V4.21 and above

3. Supports automatic firmware upgrade, and the firmware has been upgraded to the latest V2.J17.S4 at the factory;

4. Increase 5V power output, with both output I/O ports protected, not afraid of damage to LINK V2 caused by operational errors!

5. The interface uses pure copper gold-plated 2.54 pitch simple horn seat, equipped with 20CM DuPont wire, which can handle different target board wire sequences and flexibly connect wires;

6. Use a U-disk aluminum alloy shell to protect the motherboard, making it easy to carry, not afraid of static electricity, and not afraid of falling or touching.

Shipping list:

1. LINK V2 1 (sealed packaging with anti-static bag)

2. 20CM Debug 4 DuPont cables (sealed with anti-static bags)