ZVS High-Frequency Induction Heating Machine 1KW Finished Product without Tap Ready To Use Upon ArrivalItem NO.: ZVS 1KV

ZVS High-Frequency Induction Heating Machine 1KW

Product Description:

Input voltage DC 12V~40V

Input current 50A (short time)

Recommended input voltage range: DC 24V~36V

The power supply used for heating must be sufficiently large!

When powered by 12V, the current should be ≥ 20A; When powered by 24V, the current is ≥ 30A; When powered by 36V, the current is ≥ 50A. This is a reference, the actual current size is related to the actual usage situation.

Try to use a protected power supply as much as possible, and do not use switch mode power supplies with low current and no protection.

Do not use batteries or batteries for power supply!

Ensure that the working voltage is above 11V. Note that it is the voltage during operation, which is the input voltage when connecting a coil or heating an object; It is not the voltage when the power supply is unloaded.

Long term use requires copper pipes and water cooling!

A copper tube with a diameter of 10mm can be installed on the output copper column. If the diameter of the copper tube is ≤ 4mm, the copper tube can be welded onto the copper clip and then fixed on the copper column. If the diameter is ≤ 2mm, it can be connected to the output terminal

If the heating power is less than 300W, other models from our store can be used

This product is mainly used for heating. If it is a high-pressure bag, please choose several other products from our store. The power of a typical high-voltage package is ≤ 200W, and it is easy to be damaged if the power is too high!

The use of this board requires a certain level of hands-on ability and related knowledge. If you cannot even use a soldering iron and cannot distinguish the positive and negative poles of the power supply, it is recommended not to use it!

PCB board size: 165.1 * 112.41 * 1.6mm